Troubleshooting - HIGH ONE 1D 242 E W742C Instrucciones De Uso

C
Cleaning and maintenance

Troubleshooting

CAUTION!
Before troubleshooting, disconnect the power supply. Only
a qualified electrician of competent person must do the
troubleshooting that is not in this manual.
IMPORTANT!
There are some sounds during normal use (compressor,
refrigerant circulation).
Problem
Appliance does not
work
The food is too
warm.
Appliance cools too
much
Possible Cause
• Temperature
regulation knob is set
at number «0».
• Mains plug is not
plugged in or is loose
• Fuse has blown or is
defective
• Socket is defective
• Temperature is not
properly adjusted.
• Door was open for an
extended period.
• A large quantity of
warm food was placed
in the appliance within
the last 24 hours.
• The appliance is near a
heat source.
• Temperature is set too
cold.
14
Solution
• Set the knob at other number to
switch on the appliance.
• Insert mains plug.
• Check fuse, replace if necessary.
• Mains malfunctions are to be
corrected by an electrician.
• Please look in the initial
Temperature Setting section.
• Open the door only as long as
necessary.
• Turn the temperature to a colder
setting temporarily.
• Please look in the installation
location section.
• Turn the temperature regulation
knob to a warmer setting
temporarily.
EN