Idiomas disponibles
Idiomas disponibles
C
Cleaning and maintenance
Replace the lamp
• This product contains a light source exempted of energy
efficiency class.
• Light source in this product can be replaced by the end user.
• Please unplug the appliance before any light source change
operation.
• The light source shall be removed at the end of the product's
useful life, with sorting and recycling done separately.
CAUTION!
Before replacing the lamp, shall disconnect the appliance
form mains power supply.
Lamp specification is listed in rating label.
Follow below process to replace the lamp:
1. Set the temperature regulation knob at number «0» to switch
off the appliance.
2. Unplug the appliance to make sure the appliance is disconnected
from main power supply.
3. Remove the screw of the lamp cover.
4. Pull the lamp cover out.
5. Unscrew the lamp.
6. Fit new lamp according to the opposite direction, then replace
the lamp cover and screw.
7. Plug in the appliance and regulate the knob to right position.
13
EN
