Idiomas disponibles
Idiomas disponibles
www.nortonabrasives.com
For appliances equipped with suitable acces-
sories:
-
Release the levers (1 Fig. A) and remove
the entire head unit (2 Fig. B).
- Check that the fleece filter bag (4 Fig. C)
is inserted in the waste container (3 Fig.
C).
-
If the fleece filter bag is not present, insert
it as follows:
Slot the fleece filter bag onto the nozzle
(5 Fig. C) over the neck (6 Fig. C).
Arrange the fleece filter bag carefully in-
side the waste container (3 Fig. B).
-
Reassemble the entire head unit (2 Fig.
B) and secure it with the levers (1 Fig. A).
-
Insert the sleeve (7 Fig. D) of the suc-
tion hose into the nozzle (8 Fig. D) on the
waste container.
To release the sleeve (7 Fig. D), turn it
slightly and pull it outwards.
NOTE:
When the nozzle (8 Fig. D) is not in use,
close it with the cap (9 Fig. D) provided.
-
Screw on the ergonomic handle (11 Fig.
E) to connect it to the flexible tube (10
Fig. E).
-
Connect the extension (12 Fig. F) to the
ergonomic handle (11 Fig. F).
-
Join the two rigid extensions (12-13 Fig.
G).
-
Attach the chosen accessory to the rigid
extension (13 Fig. H) (suction nozzle,
brush attachment, crevice tool, etc., Fig.
H).
NOTE:
The suction force can be adjusted on the
grip, by turning the handle (14 Fig. I).
Rotate the handgrip over the little window (15
Fig. I) to decrease the suction.
NOTE:
The reduction sleeve can be installed on the
flexible tube (10 Fig. E).
Tools connection
Power tool connection
-
Lift the cover (16 Fig. J) and connect
the power tool plug to the outlet (17 Fig.
J) present on the head of the vacuum
cleaner (maximum power allowed 2400
W).
Pneumatic tool connection (optional)
For
appliances
attachments:
-
Connect the hose (18 Fig. J) of the
pneumatic tool to the relative fitting (19
Fig. J) present on the head of the vacuum
cleaner.
-
Connect the pneumatic power supply line
(20 Fig. J) to the fitting (21 Fig. J) present
on the head of the vacuum cleaner
(maximum pressure allowed 10 bar).
Liquid suction
WARNING:
Risk of electric shock!
In the event of foam or liquid leakage,
switch off the apparatus immediately.
Empty the recovery tank and clean the
filters as described in the relevant para-
graphs.
NOTE:
Clean the water level sensors regularly and
check the state of wear as described in the
relevant paragraph.
For appliances equipped with suitable acces-
sories:
-
Release the levers (1 Fig. A) and remove
the entire head unit (2 Fig. B).
-
Remove the fleece bag (4 Fig. C) if pre-
sent.
ENGLISH - 5
fitted
with
relative
*Norton Class H model not available
