Idiomas disponibles
Idiomas disponibles
PROBLEM
Clean water tank is empty.
No solution
Clean water tank is not installed
spraying out.
correctly.
Hose nozzle will
not spray after
Air is trapped in the pump and
filling the clean
hose.
water tank.
Dirty water tank is full.
Motor noise
becomes high-
The suction hose is clogged.
pitched.
The float in the dirty water tank
has been activated.
POSSIBLE CAUSE
Fill the clean water tank.
Check the clean water tank for correct
installation. Ensure it is installed in
place.
Turn on the spot cleaner. If hose does
not spray, prime the pump by lowering
the hose down to the floor and hold the
trigger for up to 1 minute.
Empty the dirty water tank.
Clean the hose.
Empty and clean the dirty water tank.
-22-
SOLUTION
