Idiomas disponibles
Idiomas disponibles
Installation (continued)
4
Securing the canopy and glass
□
Place the canopy (A) over the outlet box.
□
Align the nipple (GG) to protrude through the
appropriate hole on the canopy (A).
□
Screw the lock nut(EE) onto the nipple(GG).
□
Place the five glass panels(C) into the four sides and
the bottom of the fixture frame(D),then use the top and
bottom clips(G) to secure the glass panels(C).
6
Securing the fixture frame
□
Place the fixture frame (D) over the canopy(A).
□
Align the screws (F) on the canopy(A) to protrude
through the holes on the top of the fixture frame (D).
□
Secure the fixture frame(D) and the canopy (A) by
screwing the two lock nuts(E).
5
Installing the bulbs
□
Screw two 60-Watt maximum, incandescent. medium-
base bulbs (not included) into the sockets (B).
NOTE: You can use LED equivalent energy-saving
bulbs that does not exceed 8 Watts (not included).
7
Applying caulk
□
Caulk the space between the ceiling and the fixture
frame (D) to prevent water seeping into the outlet box.
6
e
c
