Idiomas disponibles
Idiomas disponibles
Installation
1
Separate the canopy and the fixture
frame
□
Unscrew and remove the lock nut(EE) from the nipple
(GG).
□
Unscrew and remove the lock nut (E) from the fixture
frame (D).
□
Separate the canopy(A) and the fixture frame (D).
3
Making the electrical connections
□
Wrap the ground wire from the fixture around the
ground screw (CC) on the mounting bracket (AA).
□
Use a wire connector (BB) to connect the ground
wire from the fixture to the ground wire from the
outlet box.
□
Use a wire connector (BB) to connect the white wire
from the fixture to the white wire (neutral) from the
outlet box.
□
Use a wire connector (BB) to connect the black wire
from the fixture to the black wire (live wire) from the
outlet box.
□
Wrap the three wire connections with electrical tape
for a secure connection.
□
Position the wires back inside the outlet box.
2
Attaching the mounting bracket
to the outlet box
□
Place the outlet box screws (DD) through the long oval
holes on the mounting bracket (AA), and screw them
into the threaded holes on the outlet box(not
included).
□
Screw the nipple(GG) about 6mm(adjust the length
according to the actual situation)into the mounting
bracket(AA).
□
Tighten the hex nut(FF) against the mounting
bracket(AA) to secure the nipple(GG).
5
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM
