cecotec READYWARM 1000 Manual De Instrucciones página 17

ENGLISH
Box content
- Outdoor heater
- Remote control
- Instruction manual
3. OPERATION
Base assembly
Fig. 4 key:
1. A Base (x1)
2. Nut (x1)
3. B Base (x1)
Fig. 5 key:
1. Upper parts (x4)
2. Lower parts
Fig. 6 key:
1. Holes
2. Connecting elements
Make sure that the device is not connected to a mains socket during installation.
1. Place the appliance on a horizontal and stable surface such as a table to mount the base.
Fig. 5
2. When assembling the body of the appliance, insert the four upper parts of the Base B into
the corresponding holes in the Base. There are two connecting elements in Base B. Base
B must be inserted into Base A, until you hear a "click". Fig. 6
3. Secure the base firmly with the nut in the centre. Fig. 7
Operation
- During use, keep the appliance at a safe distance from flammable objects (e.g. curtains)
and walls. Fig. 8
- Do not use the appliance on uneven surfaces or carpets.
- In the event of a fall, the anti-tip safety device on the base will automatically switch off
the appliance.
1. Insert the plug into the power socket and press the power button, the power indicator and
the high-power indicator will light up.
2. If you press the power button for a second time, the high-power indicator and the
appliance will turn off. The power indicator will remain illuminated until you unplug the
appliance from the power socket.
32
READYWARM 1000 POWER TOWER
3. Press the power button to adjust the power:
- Medium power: 500 W
- High power: 1000 W
4. Press the timer button repeatedly until the desired operating time is reached. The
corresponding indicator will illuminate.
- 0.5 hr = 30 min - 1 hr = 1 hour
- 2 hr = 2 hours - 4 hr = 4 hours
5. Press the timer button again to turn off the timer. The indicator light will go out.
6. Press the oscillation button so that the body of the appliance oscillates at an angle of 80º
from right to left. The oscillator indicator light will illuminate.
7. Press the oscillation button again to stop oscillation.
Note
Do not stop the oscillation during operation or force the oscillation movement.
Remote control
- The outdoor heater is equipped with a practical remote control for easy control and
adjustment of the functions. The remote control offers the same functionality as the
control panel built into the heater.
- The remote control is powered by two AA batteries. To install or replace the batteries,
follow the steps below:
1. Locate the battery compartment cover on the back of the remote control.
2. Slide the cover in the direction indicated to open it.
3. Insert the batteries, making sure that the poles are correctly aligned.
4. Replace the battery compartment cover and slide it back into place.
4. CLEANING AND MAINTENANCE
Maintenance
- Switch off the appliance before servicing and allow it to cool down completely.
- To keep the device clean, the outer casing can be wiped with a soft, damp cloth.
- A mild detergent can be used if necessary. After cleaning, make sure that the appliance is
dry.
- Do not use abrasive products, as this may damage or deteriorate the appliance.
- Although this appliance is approved for outdoor use, it must not get wet for safety reasons.
Wait until the appliance is completely dry before using it.
Storage
- Store the appliance in a safe, dry, and clean place if it is not going to be used during long
periods of time.
ENGLISH
33
READYWARM 1000 POWER TOWER