Idiomas disponibles
Idiomas disponibles
ENGLISH
Number
of
images
in
each series
Video
resolution
Video length
Sensor
Sensor
ON/OFF
Sensitivity
Operating
time
Trigger
interval
Time lapse
1 (= default) Up to 9 photos can be taken for each series. The
first image in each series is sent.
FHD-1920*1080 (=default), HD-1280*720, VGA-640*360
5~60 seconds, default 10 seconds
On (=default): The camera is triggered when movement is
detected.
Off: The camera is not triggered when movement is
detected.
Auto (=default) / Low / Normal / High
A higher sensitivity means that the sensor is more sensitive
to the movement of smaller objects, has a higher detection
range, and can better detect differences between body heat
and external temperature. This means that the camera
triggers more easily. With the "Auto" setting, the sensor
adjusts automatically to the external temperature.
If no operating time is set (off = default), the camera always
triggers when in active mode.
If an operating time is set (on), the camera triggers only
within the set time period. To set the operating time, confirm
"On" with "OK" and use the UP/DOWN buttons to change the
settings. Use the LEFT/RIGHT buttons to switch to the next
field and set the desired time period.
Determines the time interval between two triggers (including
sending time) from 1 second to 60 minutes.
Off (=default)
On: Select "ON" and press "OK" to set the interval. You can
configure two-time intervals (A and B). Ensure that the set
intervals do not overlap.
The camera will automatically take photos or videos in
periods A and B and the interval (default 5 minutes) set by
the user. Configurable interval: 1 minute to 24 hours.
21
