ICU CLOM Cam5 Guia De Inicio Rapido página 20

20
Video/photo capture and playback mode
In setup mode, press "" to switch between photo and video mode.
Press "" to take a photo or start/stop recording video. In setup mode, press
"OK" to go to playback mode, then press "" or "" to scroll through the
photos/videos. Press "" to watch a video, then press "" to stop playback.
Press "OK" again to exit playback mode.
Deleting videos/photos
Press "MENU" in playback mode to delete individual or all photos. Then press
"MENU" again.
Camera setup
In setup mode, press "MENU" to access the operating menu. In Settings, use "",
"", "" or "" to navigate. Confirm changes with "OK". Press "MENU" to return
to the menu without saving the changes.
USB connection
When the camera is connected to a computer via a USB cable, the memory card
will appear in the computer file menu.
Camera
Name
Mode
Image
resolution
Night quality
The camera name can be set or changed here. The name is
used for identification purposes and is shown on the photos.
Photo (= default): The camera takes photos based on the set
number of continuous shots and image resolution.
Photo & video: When triggered, the camera first takes one or
more photos, then a video based on the set values for the
number of continuous shots and image resolution as well as
video length and resolution.
5MP (2560*1920) (=default),
8MP (3264*2448), 12MP (4000*3000)
Highest quality: Short shutter speed to minimize motion blur
for better image quality, but reduced IR flash range.
Balanced: Combination of highest quality and maximum
range.
Max. Range (= default): Longer shutter speed to extend IR
flash range for better night vision, but lower image quality.
ENGLISH