Idiomas disponibles
Idiomas disponibles
Installation
Requirements
Before installing
your microwave
hood combination,
make sure your location meets these requirements.
See
the installation
Instructions
for details.
Electrical
requirements
Observe all governing
codes and ordinances.
A 120-Volt, 60-Hz, AC-only,
15- or 20-amp fused
electrical
supply
is required.
(A time-delay
fuse is
recommended.)
It is recommended
that a separate
circuit serving only this appliance
be provided.
Electrical
Shock Hazard
Plug into a grounded
3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions
can
result in death, fire, or electrical
shock.
GROUNDING INSTRUCTIONS
For all cord-connected
appliances:
The microwave
oven must be grounded.
In the event of an electrical
short circuit, grounding
reduces the risk of electric shock by providing
an
escape wire for the electric
current. The microwave
oven is equipped
with a cord having a grounding
wire with a grounding
plug. The plug must be
plugged into an outlet that is properly
installed and
grounded.
WARNING:
Improper use of the grounding
plug can result in a risk of electric shock.
Consult a qualified electricianor serviceman
if the groundinginstructionsare not completely
understood, or if doubt exists as to whether the
microwave oven is propedy grounded.
Do not use an extension cord. If the power supply
cord is too short, have a qualified electricianor
serviceman install an outlet near the microwave
oven.
5
