Idiomas disponibles
Idiomas disponibles
Removing a jammed nail
Try to operate the tool for two
more times to confirm the nail is
jammed.
NOTE: Before removing
a jammed nail, open the
magazine(see fig. C1) and
remove all the nails.
WARNING: Always
remove the battery pack
first and wear safety gloves.
• Keep the magazine open.
• Pull up on the tool free jam
release and unhook the latch
• Make sure the tip of the driving
mechanism is in the initial
position, if not, insert a flat head
screwdriver into the tip of the
driving mechanism and push
back.
• Remove any bent nails
• Close the jam release and latch
• Reinstall brad nails and
reactivate the tool
6. MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
7. ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authorities or retailer for recycling advice.
20V Cordless 18 Gauge Brad Nailer
See Fig. H1,
H2, H3
13
EN
