Idiomas disponibles
Idiomas disponibles
RECOMMENDED COMPRESSED AIR SYSTEM
No.
1
Air tool
2
Air hose
3
Quick coupling
4
Oiler (for tools with motor)
5
Pressure reducer
MAINTENANCE / CLEANING
This compressed air tool is maintenance-free. Clean the tank and gun with clean water. After use,
pour clear water into the container and clean the internal parts of the gun by spraying the clear water.
COMPONENTS
1
Nozzle, narrow
2
Nozzle, wide
3
Frothing chamber
4
Hook for hanging
5
Valve lever
6
Cap
7
Trigger lever
8
Handle
9
Containers
10 Air connection
CAUTION
•
This product can only be used with water or neutral, non-caustic detergents. Tool components
will degrade if acidic or alkaline fluids are used.
•
Do not press on the frothing chamber during use. This will damage components and endanger
the operator.
USE
1. When adding cleaning liquid, please hold the cap (6) with one hand and rotate the container (9)
with the other hand so as not to loosen other parts of the gun.
2. Turn the valve lever (5) to the upright position to open the valve.
3. Connect the compressed air connector (10) to the hose from the compressed air source.
4. Actuate the trigger lever (7) to start the spraying process.
5. After use, turn the valve lever (5) to the horizontal position to close the valve and release the air
inside.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Designation
Tel.: 02196 720480
Fax.: 02196 7204820
No.
Designation
6
Drainage/filtering unit
7
Drainage valve
8
Shut-off valve
9
Dryer/filter unit
10
Compressor
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
