Idiomas disponibles
Idiomas disponibles
IMPORTANT NOTES ON PERSONAL SAFETY
• Only operate the tool at a safe distance from yourself and other persons
• Always ensure a firm foothold in order to be able to maintain your balance at all times.
• Never reach through or over electric cable or air hoses.
• Do not use this tool if you are under the influence of medication, alcohol or drugs, or if you are
tired. Read the package insert of your medicine in order to rule out an impairment of your
judgement or reflexes.
• Do not use the device if there is any doubt about the functionality of this tool.
• Always stay aware. During work, observe your workplace and carry out work with utmost care.
• Before use, check the tool for damage. If a part is damaged, use the tool again only after all
damaged parts have been repaired by an authorised specialist.
OCCUPATIONAL SAFETY
When using this tool,
always wear following protective equipment:
•
Safety glasses
•
Hearing protection
•
Anti-slip safety shoes
•
Work gloves
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
UNPACKING
When unpacking, make sure that no parts are missing or damaged.
Contact your dealer if parts are missing or damaged.
AIR SOURCE
Clean air at the correct pressure is essential to supply this tool. The working pressure for this tool is
specified in chapter "Technical data" and is recommended for most compressed air tools of this class.
An increase in pressure is required if the length of the air hose or other circumstances result in a
decrease in pressure. The air pressure has to be increased in order to guarantee the working
pressure at running tool. Water in the hose and compressor leads to a reduction in performance and
damage to compressed air devices.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
