Idiomas disponibles
Idiomas disponibles
impact the safe operation of the device. If damage is discovered, hand over the device for repair
before use.
d)
Keep the device out of the reach of children.
e)
Device repair or maintenance should be carried out by qualified persons, only using original spare
parts. This will ensure safe use.
f)
To ensure the operational integrity of the device, do not remove factory-fitted guards and do not
loosen any screws.
g)
Avoid situations where the device stops working during use due to excessive loading. This may result
in overheating of the drive elements and damage to the device.
h)
Do not touch articulated parts or accessories unless the device has been disconnected from the power
source.
i)
Do not leave this appliance unattended while it is in use.
j)
Clean the device regularly to prevent stubborn grime from accumulating.
k)
The device is not a toy. Cleaning and maintenance may not be carried out by children without
supervision by an adult person.
l)
It is forbidden to interfere with the structure of the device in order to change its parameters or
construction.
m) Keep the device away from sources of fire and heat.
n)
Before each use, check that the machine does not show signs of wear or damage.
o)
Always keep your hands, feet and other parts of the body away from the cutting elements, especially
during the engine start.
p)
The blades continue to rotate due to the power of inertia for a few seconds after switching the
machine off.
q)
Always make sure that there are no metal objects or other elements in the work area that could be
ejected by the cutting elements and cause damage to property or personal injury
r)
While starting the machine, be cautious and do not approach the cutting elements
s)
Before each use, make sure that all nuts, screws and all machine parts are properly tightened.
t)
Do not operate the machine on excessively steep, sloping surfaces.
u)
When operating the machine on an inclined surface, always move diagonally across the slope, never
move in the top-bottom direction.
v)
Take special care when changing the direction of movement when operating the machine on slopes.
w)
Take special care when reversing the machine or pulling it towards yourself.
x)
Do not touch the silencer or other hot elements when the engine is hot it may cause serious burns.
y)
Make sure that fuel is stored only in certified containers (e.g. canister).
z)
Do not refuel near sparks, flames or lit cigarettes.
aa) Do not overfill fuel tank and avoid spilling fuel while refuelling. Spilled fuel or fuel fumes may catch
fire. If fuel has been spilled, make sure that the area is dry before starting the engine.
bb) After refuelling, make sure that the fuel tank cap is properly screwed on.
cc) Do not operate the engine or refuel in enclosed areas without appropriate ventilation.
dd) If the fuel tank has to be drained, this shall be done outdoors.
ee) If fuel is spilt, do not attempt to start the power source before moving the machine away from the
spillage area.
ff)
Danger! Danger to health and the risk of explosion of the internal combustion engine
gg) Poisonous carbon monoxide is present in the engine exhaust. Remaining in a carbon monoxide
environment may lead to losing consciousness or even death. Do not run the engine in a closed space.
hh) Protect the engine from heat, sparks and flame. Do not smoke near the machine!
ii)
Petrol is flammable and explosive. Before refuelling the engine should be turned off and cooled down.
jj)
Warning! Risk of engine damage due to wrong fuel.
kk) After refuelling, tighten the fuel filler cap securely and move at least 3 meters away from the fuel
filling area before starting the engine.
ll)
Make sure that the engine is turned off before transporting the device or subjecting it to maintenance.
mm) Push the device slowly, do not accelerate, turn or brake sharply. Please note that the device may tilt or
jump on uneven surfaces.
nn) Before starting the work, check the soil in which the device will operate and remove hard and sharp
objects so as not to damage the product.
EN
