Costway TQ10150 Manual Del Usuario página 7

2: Installation of the support bracket
Remove the M5*20 screw and M5 nut from the support bracket, align the
holes in the support bracket with the holes in the front panel attachment bar
and secure with the screw and nut.
3: Installation of the seat
Remove the M5*40 screws (2pcs) and M5 nuts (2pcs) from the body seat
frame, align the seat with the holes in the body seat frame and secure with the
screws and nuts.
12
4: Installation of the cup holder
Place the cup holder on the body iron.
Maintenance
1. To guarantee that your baby will not be hurt unexpectedly, please frequently
check and maintain this car.
2. Check if package assemblies are complete before assembling, contact us
immediately if there is a lack.
3. Check whether has screws loosen or parts damaged on a regular basis.
4. Please frequently check whether it is intact when each part is installed or used.
5. When disassembling, please operate according to the operating specification
carefully to avoid to cause unnecessary damage.
6. Please check product and the charger used on a regular basis, check whether
wire, plug, outer shell and other parts are damaged and you should stop use if
find damage, till it is repaired well.
7. Please do cleaning for this product at a regular time, fill lubricating oil into
rotating parts. Be careful not to damage the electric elements, don't use water
to wash, use dry cloth to wipe.
13