Idiomas disponibles
Idiomas disponibles
36 OPERATION
Special Functions
Some cycle option buttons also activate secondary
functions. These special functions are marked with an
asterisk (*). Press and hold the option button marked
with the special function to activate it.
* Bloqueo de Panel(Control Lock)
Use this option to prevent unwanted use of the dryer
or to keep cycle settings from being changed while
the dryer is operating.
Press and hold the button marked Anti
Arrugas(Wrinkle Care) for 3 seconds to activate
or deactivate the Bloqueo de Panel(Control Lock)
function. The Bloqueo de Panel(Control Lock) icon
will be shown in the display, and all controls will be
disabled except the Encendido/Apagado (Power)
button.
NOTE
Once set, Bloqueo de Panel(Control Lock) remains
active until it is manually deactivated. Bloqueo de
Panel(Control Lock) must be turned off to run another
cycle. To deactivate Bloqueo de Panel(Control Lock),
press and hold the Anti Arrugas(Wrinkle Care) button
for 3 seconds.
Alerta Secado Húmedo(Damp Dry Signal)
With this option, the dryer will signal when the load
is approximately 80% dry. This allows you to remove
faster- drying lightweight items or items that you
would like to iron or hang while still slightly damp.
Señal(Signal)
Press and hold the Nivel de Secado (Dry Level)
button for 3 seconds to adjust the volume of the
signal. Press and hold the button repeatedly to adjust
the volume of the melody. When no signal is heard,
the signal is off. The volume settings are ON – OFF.
The signal volume can be adjusted at any time as
long as the dryer is turned ON.
* Apag./Enc. Predet.(Default On/Off)
This option allows the Ahorro de Energía(Energy
Saver) settings to be changed. To run a Normal cycle
without the Ahorro de Energía(Energy Saver) option,
press and hold the Ahorro de Energía(Energy
Saver) button for three seconds. Encendido(On) or
Apagado(Off) appears in the display.
