Grip Rite GRTBN200N Manual Del Operador página 11

ADJUSTING NAIL DRIVE
1. Disconnect tool from air supply
using quick-connect coupling.
2. Turn adjustment dial backward
to increase nail drive, or forward
to decrease nail drive, as
shown by nail symbols on tool.
3. Connect tool to air supply, and
drive nails to check for correct
depth of drive.
4. Make depth of drive adjustments
as needed to maintain
consistent nail driving.
SELECTING
TRIGGER OPERATION
1. Disconnect tool from air supply
using quick-connect coupling.
2a. BUMP FIRE OPERATION
Slide the selector button (E)
on the trigger to the forward
position.
2b. SEQUENTIAL FIRE OPERATION
Slide the selector button (E)
on the trigger to the rear position.
3. Connect air tool to air supply
at quick-connect coupling.
11
OPERATION