Idiomas disponibles
Idiomas disponibles
ENGLISH
Do not apply steam during dry ironing of synthetic, silk, or woollen garments.
Steam burst
Turn the knob to the Cotton or MAX/linen position. When the indicator light changes from
flashing to steady, press the steam button twice in succession: the corresponding indicator
light will light up and the iron will emit a steam burst. To release another steam burst, wait 5
seconds for the indicator light to go out, then press the steam button again twice in succession.
Warning:
1. Make sure the tank is at least 1/4 full.
2. Select the desired temperature setting and wait for the indicator light to change from
flashing to steady.
3. During use, press the steam button twice to start the electromagnetic pump.
Spraying
This function can be used for both dry ironing and steam ironing to dampen ironing fabrics.
1. Make sure the tank is at least 1/4 full.
2. Press the spray trigger during ironing to spray water.
Self-cleaning
For good ironing results and to keep the iron in good working condition, clean the iron at least
once every two weeks. If the water in your water system is very hard, clean the iron more
frequently.
1. Fill the water tank to MAX and plug in the iron; turn the temperature selector to the MAX/
linen position and wait for the indicator light to change from flashing to steady.
2. Then, turn the temperature selector to the OFF position. With the soleplate downwards,
hold the iron over a sink or container and press the steam button for 3 seconds to start
the electromagnetic pump for 1 minute: water and steam will come out of the soleplate.
3. Press the steam button again if necessary. If the water tank is empty, fill it up. Shake the
iron lightly to expel more water. When cleaning is finished, turn the temperature knob to
MAX/linen position, wait for the indicator light to change from flashing to steady and iron
an unused fabric so that the remaining water inside the soleplate is vaporised.
4. Drain the remaining water, allow the iron to cool down and store it. If the soleplate is dirty,
clean it with a soft, damp cloth.
Note: you can press the steam button at any time to stop cleaning the iron.
Automatic shut-off function
-
The automatic shut-off system automatically switches off the iron in case of inactivity.
-
The iron will automatically switch off after 15 minutes of inactivity in vertical position or
30 seconds of inactivity in horizontal position without moving it, or if it is left tilted for 30
seconds.
36
IRONHERO 3000 SAUNA I-PUMP
