Idiomas disponibles
Idiomas disponibles
DIRT SENSOR
The electronic dirt sensor is a feature
which will detect particles as they pass
through the vacuum cleaner.
The dirt sensor indicator is located on the
front of the switch cover.
The red light indicates dirt is being picked
up by the cleaner.
OPERATION
As you vacuum, the red indicator light will
come on and stay on as long as the
sensor detects a high concentration of
particles passing through the vacuum
cleaner.
No light indicates that most of the
cleaning is complete.
Switch
I
Cover
Electrical Shock And Personal
Injury Hazard
Disconnect
electrical supply before
performing
maintenance
to the
unit. Failure to do so could result in
electrical
shock or personal
injury
from cleaner suddenly
starting.
TO CLEAN
DIRT SENSOR
OPTICS
The dirt sensor optics consist Of two optic
cells located inside the bag holder.
Occasionally, it may become necessary to
clean the two optic cells to assure
maximum performance.
It is
recommended
the optic cells be cleaned:
•When the red light stays on
continuously.
•When dirt or dust adheres to the
optic cells.
•Whenever the dust bag is changed.
To clean the sensor, wipe the optic cells
with a soft, dry cloth. Never use cleaners
or liquids as they can help speed the
recoating
of the optic cells and make it
necessary
to clean them much sooner
than normal. The dirt sensor area can be
reached
by removing
the dust cover and
the dust bag.
Optical
Cells _.
Ii
_ Bag
Holder
12
