Hansgrohe AXOR Carlton 17430 Serie Instrucciones De Montaje página 6

Assembly
17430XXX/17630XXX
1. Flush through the supply pipes.
2. Mount the ball S - unions.
3. Fasten the mixer using ball union nuts, align
and tighten it.
The ball - S - unions enable inaccuracies in
the wall installation to be compensated for,
whether in the horizontal direction, in the ver-
tical direction or in the parallel orientation.
4. Screw the escutcheons down to the wall.
Large differences in pressure between the hot
and cold water supply should be balanced.
Assembly
17470XXX
1. Flush through the supply pipes.
2. Mark the holes on the bath rim and drill (cen-
tre distance 150 mm).
3. Mount the elbow unions with O-rings and
escutcheons.
4. Fasten the mixer and tighten it.
Large differences in pressure between the hot
and cold water supply should be balanced.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Connection dimensions:
Recommended hot water temperature: 65° C
Rate of flow by 3 bars:
Back flow and vacuum breaker
6
English
Spare parts
1
2
3
4
5
6
7
8
9
XXX = Colors
000 chrome plated
090 chrome/gold plated
810 satinox
840 fine brass
max. 10 bars
1 - 5 bars
16 bars
max. 80° C
G ½"
25 l/min
knob for cold water
knob for hot water
aerator cpl.
aerator gold plated
spout cpl.
selector cpl.
diverter knob
stop unit
ball S-unions
ball S-unions 120 - 180 mm
pillar union
®
17291XXX
17292XXX
13485000
94981990
92440XXX
94103000
94102XXX
94149000
13989000
13988000
92470XXX