Idiomas disponibles
Idiomas disponibles
Right joystick
Headless Mode
The flight direction of the drone is subjected to the direction of remote control.
1. When the drone adjusts the frequency, the drone is default to common mode. Then the indicator
light of the drone is normally on. When you press the headless function key of the remote control, the
remote control beeps once and enters a headless state. When you press the headless function key
again, you listen to a long beep sound and the drone exits the headless mode.
2. ln the headless state, the operator doesn't need to identify the direction of the nose but control the
drone according to the operating level of the remote control.
Hover
When you release the left joystick (throttle) after the ascent/descent action, the drone will hover at a
certain height.
Left joystick
FINE-TUNING FUNCTION
When deviating from course, click "Fine-tuning" for calibration until the drone is back to normal.
NOTES:
When the drone is within 30cm from the ground, it will be affected by the blade vortex made by itself
and become unstable. This is the "ground effect". The lower this drone is. The greater the effect will
be.
Forward/Backward
1
Fine-tuning
Left/Right Side
2
Fly Fine-tuning
18
