3. ASSEMBLNG PROTECTIVE GUARD
Align the protective
1
guard with the two
holes below.
4. ASSEMBLING PROPELLERS
Correspond the
1
Propellers with the hex
nuts of the crankshaft
(The arm identification is
consistent with the Propellers
identification)
5.BATTERY CHARGING FOR DRONE
A. Remove the lithium battery from the bottom
of the drone.
BATTERY INSTRUCTIONS
There is a certain risk when using lithium batteries.
Press firmly on the
2
arrow position.
Tighten the screws
2
clockwise.
NOTES:
LED lights turn red when charging and it will
turn green when full charging completes. The
charging time is about 150 minutes. The usage
time is about 6 minutes.
14