Tabla de contenido
Idiomas disponibles
Idiomas disponibles
1
Package Contents
2
Specifications
3
Connecting Devices
4
Positioning the Projector
1.
Installation worksheet for projecting on a pre-installed wall-mounted board
2.
Installation worksheet for projecting on a plain wall
3.
Installation measurements in inches for BrightLink 475wi+/485wi+
4.
Installation measurements in millimeters for BrightLink 475wi+/485wi+
5
Installing the Projector
1.
Disassemble the parts
2.
Assemble the parts
3.
Install the wall plate on the wall
4.
Determine the projection distance and pull out the slider
5.
Route the cables through the wall mount arm
6.
Attach the mount arm to the wall plate
7.
Adjust the vertical slide position of the arm
8.
Attach the projector to the wall mount
9.
Connect the power cord and other cables to the projector
6
Adjusting the Image
1.
Turn on the projector
2.
Display the test pattern
3.
Change the aspect ratio if necessary
4.
Adjust the focus
5.
Use the adjustment knob on the left side to adjust the horizontal roll
6.
Use the adjustment knob on the right side to adjust the horizontal rotation
7.
Use the adjustment knob on the top to adjust the vertical tilt
8.
Adjust the horizontal slide
9.
Adjust the forward/backward slide
10.
Adjust the vertical slide
11.
Turn off the display of the test pattern
7
Attaching the Covers
1.
Attach the wall plate covers and end cap
2.
Attach the cable cover to the projector
8
Appendix
1.
Using the Easy Interactive Function
2.
Attaching a Security Cable
3
s 4
s 5
s 7
s 8
s 18
s 30
s 36
s 38
Tabla de contenido
