WolfPack DT2211 Manual De Instrucciones página 39

6. ASSEMBLY AND ADJUSTMENTS
WARNING! The Vacuum-Blower must not be used or switched on until it
has been fully assembled.
Assemble wheel and blower/suction tube (Fig. 2, Fig. 3, Fig. 4, Fig. 5)
Pull out two wheels and the blower tube, holding the blower tube and installing two wheels,
refer to Fig.2.
Pull out the central tube and slide the blower tube into the central tube. Refer to Fig.3.
Pull out the suction tube and place the suction tube onto the central tube; the suction tube
will click into place. Refer to Fig.4.
Put the whole tube into the machine body — refer to Fig. 5
Fig. 2
Fig. 4
Pull out two screws that are in the manual bag from the package, the user needs to
assemble and fasten the screws (ST4 x 14) until they connect well. Refer to Fig. 6.
Fig. 6
39
Fig. 3
Fig. 5