Idiomas disponibles
Idiomas disponibles
INSTALLATION
PART 3: Make Final Adjustments
1. Check for proper operation of the latch to see
if any adjustments are required.
2. To adjust the horizontal alignment, use a
screwdriver to turn the adjustment screw in
the keeper assembly (Figure 11).
NOTE: Do not extend the keeper to the point
where the max travel indicator passes the gate
edge (Figure 10).
3. To adjust the vertical alignment, use a different
vertical adjustment hole in the lower bracket
for the #8 flat head screw to secure the latch
body in place (Figure 11).
GATE
EDGE
MAX TRAVEL
INDICATOR
Figure 10
Figure 11
7
