Westward 5ML69B Manual De Instrucciones

Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself
and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in
personal injury and/or damage to product or property. Please retain instructions for future reference.
Description
Westward hydraulic Quick Lifting jacks are used for lifting part of a total vehicle (i.e., one wheel). Jacks are equipped
with a built-in by-pass device to prevent damage to jack from overextension. An internal safety valve prevents
damage to jack from overloading. Applications include automotive, truck, farm, industrial and construction. These
jacks are designed to meet applicable ASME/ANSI PALD Standard.
Handle
Specifications and Dimensions
Model Capacity
5ML69B 5 Ton (4,535 kg)
General Safety Information
Save these instructions. For your safety, read, understand, and follow the information provided with and on this
device before using. The owner and/or operator shall have an understanding of the device, its operating characteristics
and safety operating instructions before operating the equipment. The owner and/or operator shall be aware that use
and repair of this product may require special skills and knowledge. Instructions and safety information shall be read
to and discussed with the operator in the operator's native language, making sure that the operator comprehends their
contents, before use of this equipment is authorized. If any doubt exists as to the safe and proper use of this device,
remove from service immediately.
Inspect before each use. Do not use if abnormal conditions such as cracked welds, damaged, loose or missing parts
are noted. Any equipment that appears damaged in any way, is found to be worn, or operates abnormally shall be
removed from service until repaired. If the equipment has been or is suspected to have been subjected to an abnormal
load or shock, immediately discontinue use until inspected by a factory authorized repair facility (contact distributor
or manufacturer for list of authorized repair facilities). It is recommended that an annual inspection be made by an
authorized repair facility. Labels and Operator's Manuals are available from the manufacturer.
SHI020
Printed in Taiwan
012018
Long Chassis Hydraulic
Service Jack
Release Knob
Lift Arm
Handle
Handle Position
Sleeve
Lock Lever
Foot
Pedal
Figure 1 - Hydraulic Service Jack Components
Length
52-3/8" (133.03 cm)
Saddle
Front Wheel
Cover Plate
Caster
Min Height
6-1/2" (16.51 cm)
5ML69B
Max Height
22-1/4" (56.52 cm)