Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Continuous running of meat grinder should be not more than 5 minutes.
Reverse function is prohibited while the appliance is operating (For example
switch"ON"knob to"R"knob or on the contrary), wait at least one minute until grinder
has come to a complete stop
a transitory electric spark in the appliance. It could result easily damage to appliance
and make a user frightened.
After use, there would be a little food left in the grinder head. This is normal. There
might be a bit of black metal powder adhering to the food ground in the end. Please
pick them out and throw away, do not eat them.
To avoid jamming, do not force to operate the unit with excessive pressure.
When the circuit breaker activates, do not switch on.
Never try to replace the parts and repair the unit by yourself.
Children or handicapped should be supervised to ensure that they do not play with the
appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Check that voltage indicated on the rating label corresponds the mains voltage in your
home.
Wash all parts (except body) in warm soapy water.
ASSEMBLING
Holding the head and insert it in the inlet with one hand, revolves toward left (fig.2).
Place the feed screw into the head, long end first, by turning the feed screw slightly
until it is set into the motor housing (fig.3).
otherwise it may cause an abnormal noise, vibration or
FOR THE FIRST TIME
INSTRUCTION FOR USE
P-3
Tabla de contenido
