Authorized Operators; Transportation And Packaging; Recycling & Disposal; Technical Data - Engmar FL150A Guía De Usuario

All the parts ensuring the extraction (sensor, lance, handle, hose...) must be assembled in the
correct position and in good condition to guarantee the safety of the welder and the cooling
of the welding equipment. The pressure relief valve, if any, should normally be closed and
opened only temporarily. On models with a button on the torch handle to turn off the suction,
this should only be operated when necessary and in exceptional circumstances.
The ENGMAR welding torches must be operated only by persons who have been trained
by ENGMAR and/or authorized representatives and who are aware of the relevant safety
instructions. The owner of the product must make this operating manual available to each
operator and ensure the operator has read and fully understands the instructions prior to use.
Any use by untrained persons is not permitted.
In case of damage or complaints during warranty, please contact your ENGMAR distributor or
ENGMAR and return the entire torch at your expense to:
Welding torches must be recycled in accordance with the regulations in place in your country.
In France and the other countries of the European Union, the collection and recycling of
this equipment is mandatory. We invite you to contact your reprocessing centre for precise
collection and disposal procedures.
Parameters for automatic and manual welding torches according to EN 60974-7:
Welding technique
Max. open-circuit voltage
Voltage class
Wire feed rate
Control wires
Connection
Welding method
All values are based on a hose package length of 4m. For longer hose packages or pulsed
welding, mentioned values decrease.
2 . S A F E T Y
T R A N S P O R TA T I O N A N D PA C K A G I N G
ENGMAR
ZA La Poste
Impasse du Pré Rond
69490 SAINT-ROMAIN-DE-POPEY
Tél. : 00 33 (0)4 74 01 10 10
E-mail : [email protected]
www.engmar.eu
3 . T E C H N I C A L D A T A
19
A U T H O R I Z E D O P E R A T O R S
R E C Y C L I N G & D I S P O S A L
MIG / MAG
Uo = 113V
L
1 - 30 m/min
bipolar (0,5 mm
Euro Connector
Manual
)
²