Vortice C HCS Folleto De Instrucciones página 11

ENGLISH
!
Caution:
this symbol indicates that care must be taken to avoid injury
• Do not use this product for functions other than
those described in the instruction booklet.
• After having removed the product from its packing,
ensure that it is complete and undamaged: if in
doubt contact Vortice Service Centre. Do not leave
packaging in the reach of children.
• Do not sit or place objects on the appliance.
• The use of any electrical appliance requires that
certain fundamentales rules are observed:
- do not touch it with wet or damp hands;
- do not touch it wet barefoot;
!
Precaution:
• Do not make any modifications of any kind to your
product.
• The appliance must not be exposed to atmospheric
conditions (rain, sun, etc.).
• Follow the instructions of the manufacturer.
• The appliance must be installed by a professionally
qualified person.
• Perform periodic inspection on the unit to see that it
is free of visual defects. If any are found, do not
operate the unit and immediately contact Vortice
Service Centre.
• The electrical mains to wich the unit is connected
must conform to current standard.
• Since the appliance is double insulated, it does not
need to be earthed.
• The electrical power source to which the product is
The power-source data must be consistent with
the electrical data shown on the nameplate (A).
this symbol indicates that care must be taken to avoid damaging your product
- it must be used by unattended children.
• Do not operate the appliance in the presence of
inflammable vapours (alcohol, insecticides, petrol,
etc.).
• If the appliance is to be removed, turn the switch to
off and then disconnect the unit from the mains. Do
not leave the appliance in reach of children.
• The appliance is not intended for use by young chil-
dren or infirm persons without supervision.
• Young children should be supervised to ensure that
they do not play with the appliance.
to be connected must be able to provide the
maximum amount of electrical power required by the
product. If it cannot do this, contact an electrician for
appropriate remedial action.
• Don't cover the unit and don't obstruct the grids of
the unit.
• When installing the appliance, a multipolar switch
must be used. The switch interpole distance must be
no less than 3 mm.
• Should the appliance be dropped or suffer a heavy
blow, have it checked immediately by a qualified
engineer.
• Should the appliance fail to operate or not operate
correctly, turn the switch to off. Contact Vortice
immediately and, if repairs are required, make sure
that original Vortice parts are used.
11