Idiomas disponibles
Idiomas disponibles
7. Sam: The heat output level can be changed over the buttons (10) «Power
Level». Typing «+» increases the output level. Typing «–» reduces the
output level.
Output level 1 =700 W
Output level 2 =1'000 W
Output level 3 =1'500 W
Output level 4 =2'000 W
The setting is saved if no change occurs on the control panel for selec-
tion of heat output level for three seconds. The current room tempera-
ture is subsequently shown on the display.
8. Sam little: Using the output button (10), you can control the heating out-
put of Sam little:
a. Button in = 1'500 W
b. Button out = 800 W
9. Sam: Auto mode is activated (deactivated) by pressing the «Auto Mode»
button (11). «Auto Mode» is shown in the display. The preset target
temperature of 22 °C can be changed using the buttons for selection of
temperature (9). The heat output level is selected automatically in auto
mode - depending on the room temperature. The smaller the difference
between the room temperature and the target temperature, the smaller
the heat output level selected. We refer to this as «Adaptive Heat
technology. This allows Sam to make sure that the target temperature
is reached, quickly and efficiently, and maintained. Sam thus prevents
a sharp temperature drop and prevents the appliance from being con-
stantly switched on and off. Auto mode is deactivated if the heat output
level is changed manually (10).
Info: The appliance switches off the heating element when the target
temperature is reached and the temperature indicator flashes on the
display.
10. Turn off the device by pressing the On/Off button (7) on Sam and the
main switch (3) on Sam little. The ventilator remains switched on for
15 seconds at the lowest level to cool down the heating element. The
appliance saves the temperature input and the heat output level even if
the appliance is switched off.
11. Protection against overheating: the appliance is equipped with over-
heating protection which switches off the appliance in the event of a
technical fault or improper use (the ventilator continues to run for some
time at the lowest level to cool down the appliance). Should this occur,
rectify the fault or cease the improper use (e.g. 50 cm space around the
appliance, do not cover the appliance, set the appliance up in an upright
position). Once the appliance has cooled down it can be put back into
service.
12. Sam: The temperature indicator can be changed from Celsius to Fahr-
enheit and vice versa by pressing the «Auto Mode» button (11) for five
seconds.
13. Sam: You can connect Sam to the "Stadler Form" or the "Smart Life
– Smart Living" app from Tuya Inc. (available in the App Store and via
Google Play) on your smartphone by pressing the Wi-Fi button (12) for
3 seconds. If the device is in pairing mode, the Wi-Fi symbol on the dis-
play (13) flashes. The Wi-Fi symbol shown on the display (13) indicates
an active connection between the device and your smartphone. All
the device's functions can be controlled from anywhere and the room
»
TM
