Watts AMES 4000SS Serie Manual De Instalación & Mantenimiento
Watts AMES 4000SS Serie Manual De Instalación & Mantenimiento

Watts AMES 4000SS Serie Manual De Instalación & Mantenimiento

Conjunto de zona de presión reducida
Ocultar thumbs Ver también para AMES 4000SS Serie:
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Installation, Maintenance, and Repair Manual
Series 4000SS
Reduced Pressure Zone Assembly
8" – 12"
WAR N I NG
!
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information can
result in death, serious personal injury, property damage, or
damage to the equipment.
Keep this Manual for future reference.
WARNING
!
You are required to consult the local building and plumbing
codes prior to installation. If the information in this manual
is not consistent with local building or plumbing codes,
the local codes should be followed. Inquire with governing
authorities for additional local requirements.
WARNING
!
Need for Periodic Inspection/Maintenance: This product must
be tested periodically in compliance with local codes, but at least
once per year or more as service conditions warrant. If installed on
a fire suppression system, all mechanical checks, such as alarms
and backflow preventers, should be flow tested and inspected in
accordance with NFPA 13 and/or NFPA 25. All products must be
retested once maintenance has been performed. Corrosive water
conditions, and/or unauthorized adjustments or repair could render
the product ineffective for the service intended. Regular checking
and cleaning of the product's internal components helps assure
maximum life and proper product function.
WARNING
!
The installation and maintenance of assemblies should be
performed by a qualified, licensed technician.
Failure to do so may result in a malfunctioning assembly.
NOTICE
For Australia and New Zealand, line strainers should be installed
between the upstream shutoff valve and the inlet of the backflow
preventer.
Fittings such as end connectors intended to join alternative pipe
systems made from other materials (such as plastics) shall also conform
to the relevant dimensional and performance requirements of the
appropriate Australian, New Zealand, or joint Australian–New Zealand
Standard for the alternative pipe system.
Testing
For field testing procedure, refer to Ames installation sheets
IS-A-ATG-1 at watts.com.
For Australia, refer to Australian standard AS/NZS 2845.3.
For other repair kits and service parts, refer to the Backflow
Prevention Products Repair Kits & Service Parts price list
PL-A-RP-BPD at watts.com.
For technical assistance, contact your local Ames representative.
4000SS-OSY with Flood Sensor
Series 4000SS includes a flood sensor that detects excessive relief
valve discharges and triggers notification of potential flood events.
NOTICE
An add-on connection kit is required to activate the flood sensor.
Without the connection kit, the flood sensor is a passive component
and will not communicate with any other device. (A retrofit sensor
connection kit is also available for existing installations. See "Add-on
and Retrofit Sensor Connection Kits," for ordering details.)
NOTICE
Use of the flood sensor does not replace the need to comply with all
required instructions, codes, and regulations related to installation,
operation, and maintenance of this product, including the need to
provide proper drainage in the event of a discharge.
Watts
is not responsible for the failure of alerts due to
®
connectivity issues, power outages, or improper installation.
RP/IS-A-4000SS
Tabla de contenido
loading

Resumen de contenidos para Watts AMES 4000SS Serie

  • Página 17 Para otros kits de reparación y piezas de repuesto, consulte la lista de precios de los kits de reparación de productos para prevención de flujo de retorno y piezas de servicio PL-A-RP-BPD en watts.com. Para obtener asistencia técnica, póngase en contacto con el...
  • Página 18 Pautas de instalación Instalación en interiores AVISO Los pernos del empaque de brida para las válvulas de compuerta deben volver a apretarse durante la instalación, ya que los pernos pueden haberse aflojado debido al almacenamiento y al envío. El cuerpo del conjunto no debe pintarse. •...
  • Página 19: Mantenimiento De Las Primeras Y Segundas Válvulas De Retención

    Mantenimiento de las primeras y segundas válvulas de retención ADVERTENCIA Despresurice la válvula antes de realizar el mantenimiento o la reparación. Antes de realizar el servicio, apague el sistema de agua y bloquee el de acceso de la línea central, gire el conjunto de retención desde sistema, si es posible.
  • Página 20: Inspección Y Limpieza De La Primera Retención

    Inspección y limpieza de la primera retención Herramientas necesarias: ADVERTENCIA • Dos piezas de varilla roscada de 3/8 in (9.5 mm) (aproximadamente Despresurice la válvula antes de realizar el mantenimiento o la 14 in [35.6 cm] de largo) reparación. • Cuatro tuercas hexagonales de 3/8 in (9.5 mm) Tenga mucho cuidado al dar mantenimiento a la primera •...
  • Página 21: Mantenimiento De La Válvula De Alivio

    Mantenimiento de la válvula de alivio 6. Sujete el manguito y el conjunto del pistón por la cabeza del perno AVISO de cabeza hexagonal. Jale hacia arriba del manguito para extender el diafragma. Deslice el manguito (artículo 26) completamente fuera del Despresurice la válvula antes de realizar el mantenimiento o la diafragma e inspeccione el diafragma en busca de desgarros, agujeros reparación.
  • Página 22: Pruebas De Conjuntos De Zona De Presión Reducida

    Pruebas de conjuntos de zona de presión reducida Siga los requisitos de cada prueba cuando se realice para garantizar la instalación, la operación y el mantenimiento satisfactorios del inhibidor de flujo de retorno. Válvulas de prueba tipo bola Prueba n.º 1 Objetivo: Probar la hermeticidad de la válvula de retención n.º 2 contra el flujo inverso.
  • Página 23: Solución De Problemas

    Solución de problemas PROBLEMA CAUSA SOLUCIÓN El conjunto se descarga de la válvula de alivio diferencial Válvula de retención sucia Desensamble y limpie la válvula de retención n.º 1 durante la ausencia de caudal Presión fluctuante de entrada Controlar la presión del agua de la línea de suministro Instale una válvula de retención con resorte y asiento blando, aguas arriba del conjunto Presión de salida superior a la presión de entrada y fuga...
  • Página 24 EE. UU.: Inhibidores de flujo de retorno Tel.: (978) 689-6066 • Fax: (978) 975-8350 • AmesFireWater.com EE. UU.: Válvulas de control Tel.: (713) 943-0688 • Fax: (713) 944-9445 • AmesFireWater.com Canadá: Tel.: (888) 208-8927 • Fax: (905) 481-2316 • AmesFireWater.ca Latinoamérica: Tel.: (52) 55-4122-0138 • AmesFireWater.com RP/IS-A-4000SS 2405 7020351 © 2024 Watts...

Este manual también es adecuado para:

Ames 4000ss-osy

Tabla de contenido