Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. PROGRAMMING TOUCH CONTROL
2.1. TOUCH CONTROL BUTTONS
1.
"POWER
2.
MODE/OK" button: to access main menu and select or confirm the desired option.
3.
"UP/DOWN" arrows: allow to set the values and navigate through the different options of the menus.
4.
DISPLAY: shows the different options and desired values.
5.
RED DOT: if flashing, the device is working in F.P mode (only available in France); if not, it is working in
automatic as per the set programming.
2.2. STARTING THE DEVICE
First, plug in the power cord to a mains power outlet, and click the switch on the right. The display starts, shows a
welcome message, and shows OFF. To start the device, press the "POWER" button; set temperature appears on the
screen.
2.3. SETTING DATE AND TIME
A. Press OK for a few seconds.
B. The display shows CONFIG TIME. If not, press until you see and press OK.
C. Set the hour (H) using; to validate press OK.
D. Set the minutes (M) using; to validate press OK.
E. Press to select the day of the week (DAY 1 Monday, DAY 2 Tuesday); to validate press OK.
Date and time are now set. Press ESC and select the comfort temperature pressing the arrows. Your device is now
working!
2.4. MANUAL MODE
In this mode, the device works as per factory set. All you have to do is press to select the desired temperature.
The set temperature can be modified from 15º C to 28º C in intervals of 0.5.
How to select the manual mode?
-
Press OK
-
Press and select MAN; press OK to confirm.
-
Press and confirm the desired temperature.
Press
POWER BUTTON to switch off the unit, the display shows OFF.
If the device is OFF, the ANTIFROST setting automatically activates to prevent temperature being below 7ºC.
2.5. AUTOMATIC MODE
In this mode the device works time schedule. It can work as per factory set (see table below) or according to the user's
configuration.
/ESC" button: Turn on and off the device / allows moving back from any menu.
Tabla de contenido
