4
CONTROLS
D. Tine Lever
Raises and lowers aerator head. Lift lever to Raise
position to raise head. Push lever to Lower position to
lower head.
!
To prevent injury from hot hydraulic oil, the Tine Lever
must be returned to the Neutral position after raising or
lowering the unit. If the lever sticks or is held in the
Raise or Lower position, the hydraulic fluid will
overheat, possibly causing a hydraulic line to rupture.
E. OPC Handle
Engages and disengages drive clutch. Returns
clutch control lever (A) to disengaged position when
released.
F. Engine Switch
Controls engine operation. Move switch to ON
position for normal operation. Move switch to OFF
position to shut unit off or when adjusting, trailering,
or storing unit.
G. Choke
The choke lever opens and closes the choke valve in
the carburetor. The Closed position enriches the fuel
mixture for starting a cold engine. The Open position
provides the correct fuel mixture for operation after
starting and for restarting a warm engine.
10
WARNING
A
R
N
H
L
E
B
G
C
D
F