Technical Data; Before Operation - UFESA LC5000 Manual De Instrucciones

shall not play with the appliance.
Cleaning and user maintenance
shall not be made by children
without supervision.
WARNING!
Risk of property damage
●
Do not disconnect the plug from the socket pulling
the cord.
●
The appliance may only be plugged to an electrical
socket (alternating current only) with a voltage in
conformity with the one given on the rating plate of
the appliance.
●
Do not overload the appliance with too much product
or by pushing it too hard (with the pusher).
●
Switch off the appliance immediately after noticing
strong vibrations or reduced speed. Clean the sieve
and its housing.
●
Stop the operation and unplug the appliance if the
product is blocked in the feeding tube or on the
grinding disc. Remove the cause of the blockage.
●
Immediately stop operation and unplug the
appliance if any liquid has entered into the motor
of the juice extractor. Return the juice extractor to
a service point for inspection.
●
Do not expose the juice extractor to temperatures
over 60°C.
●
Do not leave a plugged in appliance unattended.
●
Do not immerse the motor into water. Do not wash
it under running water.
●
Do not use abrasive detergents such as emulsions,
cream cleaners, polishes, etc. to clean the housing.
They may remove the graphic information symbols
such as: scales, marks, warning signs etc.
●
Place the motor body near a socket on a flat, stable
surface so that the vent holes of the appliance are
not covered.
HINT
Information on the product
and hints on its use
●
The appliance is intended for domestic use. In case
it is used for food business purposes, the warranty
conditions shall change.
●
Unplug the appliance after operation.
●
Use a soft brush to wash the metal parts especially
the sieve with the sharp grinding disc.
●
Do not wash metal parts in the dishwasher.
Aggressive detergents used in the dishwasher
cause these parts to darken. Wash them manually
using traditional dishwashing liquids.
●
Before the first use, wash thoroughly all elements
of the equipment.

Technical data

The technical parameters are quoted on the nameplate
of the product.
Admissible time of non-stop operation
An interval between repeated operation
Noise generated by the appliance (L
The juice extractor is built in II class insulation
The juice extractor meets applicable norms
requirements.
The appliance meets the requirements of the directives:
– Low voltage electrical device (LVD) – 2006/95/EC.
– Electromagnetic compatibility (EMC) – 2004/108/EC.
The product is marked with CE symbol on the nameplate.
Description
1 Motor base
2
On/Off button
3
Clamps
4
Clutch
5
Juice bowl
6
Strainer basket
7
Cover
8
Food pusher

Before operation

Before the first use, dismantle the juice
extractor, wash and dry the parts that
have contact with the processed product.
1
Place the motor on a hard, clean and dry surface
near the electrical outlet.
2
Grasp the clamps on both sides of the appliance
and pull them away from the motor housing.
3
Lift the clamps, release the lid and lower the clamps.
4
Take out the food pusher. Remove the lid and the
bowl together with the sieve.
15 minutes
30 minutes
) 80 dB/A
WA
.
A
B