Idiomas disponibles
Idiomas disponibles
HOW TO INFLATE THE TIRE
1
1. Connect the screw-on valve connector to
tire air valve. Twisting it clockwise until it is
securely attached to the tire air valve.
3
a-1
BAR
%
Light
Power
TARGET
M
Setup
Unit
Inflator
TEST
a-2
BAR
%
Light
Power
TARGET
M
Setup
Unit
Inflator
TEST
TARGET: 2.5Bar
3. You can press "+ "or "- " to adjust the suitable value before inflating. The target is set to 2.5 bar
and you can press the inflator button to start. After reaching to 2.5 bar, the inflator will be stopped
automatically. If the target is 0.0 bar, you need to press the inflating button to stop it manually when
it reaches the pressure you would like to have. To remove the air hose from your car tire, twist the
screw-on valve connector counter clockwise.
3
b-1
PSI KG/CM BAR
2
Light
TARGET
BAR
M
Setup
Unit
Inflator
TARGET
b-3
BAR
BAR
Light
TARGET
M
TARGET
Setup
Unit
Inflator
2
2. Switch the device on.
b-2
BAR
%
%
Power
Light
Power
TARGET
M
TEST
Unit
Setup
Inflator
TEST
start
%
Power
TEST
stop
65
Light
Power
M
Setup
Unit
Inflator
TEST
LOWMIDDLEFULL
PSI KG/CM BAR
2
V
%
Light
Power
TARGET
READYOVERLOAD
COOLING
M
Setup
Unit
Inflator
TEST
3
a-3
BAR
%
Light
Power
TARGET
M
Setup
Unit
Inflator
TEST
start
a-4
BAR
%
Light
Power
TARGET
M
Setup
Unit
Inflator
TEST
Stop automatically
BAR
TARGET
