Idiomas disponibles
Idiomas disponibles
1) Take the battery case and make sure it is switched off. Open the sliding cover.
2) Put three AA standard batteries and close the sliding cover till an audible click.
BATTERY POCKET
4) To switch on the gloves use ON/OFF button on the battery case.
5) Put the gloves on and wait a few seconds to perceive pleasant warmth.
6) To switch the product off use the button on the battery case.
7) Let the product cool down before storing.
8) If the product is not to be used for a considerable time it is recommended to disconnect
the battery cases and store them separately.
PROBLEM
1. The gloves do not heat
USE INSTRUCTIONS
3) Open the glove pocket and connect the glove's jack to the bat-
tery case. Introduce the case into the pocket and close the zipper.
Thanks to the extension cords you can place the batteries out
of the gloves. Take the extension cords and connect them to the
gloves' jacks and then to the battery cases.
EXTENSION CORD
TROUBLESHOOTING TABLE
Make sure there are batteries in the battery case and check if the
polarity is right. Check if the battery cases are connected correctly.
Finally check if the battery cases are switched on. Consider that the
batteries may have discharged. Change the batteries or recharge them.
It may also be a question of appreciation.
Remember that quick checks carried out are not reliable. If all previous
steps fail and the gloves after a few minutes do not heat, take them to
an authorized service centre.
17
EN
SOLUTION
ENGLISH
GLOVES'
CONNECTING
CORD
