Idiomas disponibles
Idiomas disponibles
repair. Under no circumstances should you attempt to open the torch head. Manipulating the torch head or LED on your own poses a risk
to the safety of the torch and is not permitted.
The torch head is protected by the housing head that surrounds it as well as an additional disc, which is positioned over the opening
where the beam is emitted. The disc is made of high-quality material. Should, however, the disc break, it is possible to replace it. To
replace the disc, hold on to the body of the MasterEx Lite-Ex PL 30 and the twist ring, and carefully unscrew the housing head by turning
it anticlockwise. Clean the housing head thoroughly to remove any remaining pieces, and check the sealing ring for damage. After this
has been done, you can install a new glass disc and, if necessary, new sealing rings. Only spare sealing rings of the manufacturer are
allowed. The sealing ring is positioned between the housing head and the disc (see illustration 1). When putting the housing head back
on, ensure that the seal is positioned properly on the disc. After installation, you should not be able to see any part of the sealing ring
through the opening where the beam is emitted. If the inside of the torch head or lens is also damaged, the torch should be sent to the
manufacturer for repair.
Repair work is subject to the nationally valid regulations and directives. We therefore recommend that such work be performed by the
manufacturer, as all repairs must be examined to ensure functional safety.
- Only use a suitable cloth or sponge to clean the unit. Do not use solvents or abrasive cleaning agents to clean the unit.
- We recommended having the operation and lumen output of the device checked by the manufacturer every two years.
- The batteries should be taken out of the unit if it is to be stored for extended periods.
- The storage temperature should be within the permitted range of -30 °C to +60 °C.
Old electrical equipment and "historic" old electrical equipment from the manufacturer will be disposal obligation and disposed of
at no cost in accordance with the EC Directive 2002/96/EC and the German Electrical and Electronic Equipment law of 16/03/2005. The
costs of the transport of the equipment to the manufacturer are borne by the sender.
In accordance with "Directive 2006/66/EC on batteries and accumulators and waste batteries" we are obligated to provide you with
the following information:
Your device contains an alkaline battery.
Depleted batteries should never be disposed of along with normal or household waste. Old batteries can contain harmful substances
that are hazardous to health and damaging to the environment. Please return the batteries. Return is free of charge and required by law.
Please only dispose of discharged batteries in the designated containers.
Note: The battery used in this unit poses a fire hazard and can cause chemical injuries if it is used improperly. Neither the battery nor
the battery cells should be opened or disassembled and they should not be burned or exposed to temperatures exceeding 100 °C.
If the battery needs to be disposed of, it can be removed as described under point (8.3). The disposal regulations specified above are
also applicable for old devices.
All batteries can be recycled. Precious raw materials such as iron, zinc and nickel can therefore be reused.
The symbol
has the following meaning: Batteries and rechargeable batteries should not be disposed of along with normal or
household waste.
Under the general terms and conditions of business, the manufacturer offers a two-year warranty for function and materials on this
product when used under the specified operating and maintenance conditions. Batteries, LED/Lamps and working parts are considered
consumable parts and are not covered under the warranty.
In addition to the standard 2 years manufacturer's warranty, the manufacturer offers an optional lifetime warranty on the torch housing.
This warranty includes damage which is incurred only when the device is properly used. Damage to the front disc is not included,
neither is damage in the form of cosmetic and superficial scratches to the housing or to the 'Ex-certification' and other text contained on
the housing.
After the 2 years standard warranty period, in the event that the housing has to be changed, this optional lifetime warranty does not
include any costs that may be incurred for inspection, packing and carriage etc. This warranty is only limited by the future availability of
spare parts. This warranty is invalidated if the torch head unit has been opened / tampered with in any way or if the sealing is damaged.
This warranty does not extend to products that have been used improperly, altered, neglected, damaged by accident or subjected
to abnormal operating conditions or improper handling. In the event of a warranty claim, the faulty device should be returned to the
manufacturer. We reserve the right to readjust, repair or replace the unit.
The above warranty terms represent the sole rights of the purchaser to compensation and apply exclusively and in place of all other
contractual or statutory warranty obligations. The manufacturer does not accept liability for specific, direct, indirect, incidental or
consequential damages or losses, regardless of whether they are caused by breach of warranty, lawful or unlawful actions, actions in
good faith or other actions.
If in certain countries the restriction of statutory warranty and the exclusion or restriction of incidental or consequential damages
is unlawful, then it may be possible that the above restrictions and exclusions do not apply for all purchasers. If any clause in these
warranty terms should be found to be invalid or unenforceable by a competent court, then such a judgement shall not affect the validity
or enforceability of any other clause contained in these warranty terms.
8.6 Replacing the spare disc
9. Repairs
10. Cleaning, maintenance and storage
11. Disposal
12. Warranty and liability
-15-
