Idiomas disponibles
Idiomas disponibles
Vacation Care
If you choose to turn the wine cellar off before you leave,
follow these steps.
1. Remove all wine bottles from the wine cellar.
2. Unplug the wine cellar.
3. Clean the wine cellar. Refer "Cleaning" section.
4. Tape a rubber or wood block to the top of the door to prop
it open far enough for air to get in. This stops odor and
mold from building up.
Try the solutions suggested here first in order to avoid the cost of an unnecessary service call.
GENERAL OPERATION
Wine Cellar will not operate
The motor seems to run too much
Manual W11515230B -WC-Ingles.indd 11
Manual W11515230B -WC-Ingles.indd 11
TROUBLESHOOTING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Possible Causes and/or Recommended Solutions
Power supply cord unplugged? Plug into a grounded 3 prong
Is outlet working? Plug in a lamp to see if the outlet is working.
Household fuse blown, or a circuit breaker tripped? Replace the fuse or reset the
circuit. If the problem continues, call an electrician.
Are controls on? Be sure that the wine cellar controls are on. Refer "Controls"
section.
Is the temperature outside hotter than normal? Expect the motor to run longer
under warm conditions. At normal temperatures, expect your motor to run about
40 % to 80 % of the time. Under warmer conditions, expect it to run even more of
the time.
Is the door opened often? Expect the motor to run longer when this occurs. In
order to conserve energy, try to get everything you need out of the wine cellar at
once. Keep wine bottles positioned label side up so that they are easy to fi nd, and
close the door as soon as the wine is removed.
Moving Care
When you are moving your wine cellar to a new home, follow
these steps to prepare it for the move.
1. Remove all wine bottles from the wine cellar.
2. Unplug the wine cellar.
3. Clean, wipe, and dry it thoroughly.
4. Take out all removable parts, wrap them well, and tape them
together so they don't shift and rattle during the move.
5. Tape the doors shut and tape the power cord to the wine
cellar.
When you get to your new home, put everything back and
refer to the "Installation Instructions" received with the wine
cellar.
outlet.
11
02/02/21 15:29
02/02/21 15:29
