GE PHP960 Manual Del Propietário página 19

ge.com
Possible Causes What To Do
Pan detection/sizing
not working properly
Improper cookwore
being used.
•
Use a flat induction capable pan that meets the
minimum size for the element being used. See the
Using the correct size cookwore section.
Pen is improperly pieced. • Make sure the pan is centered on the corresponding
surface element.
Cooktop control • Check to see that the control is set properly.
improperly set.
Display flashing "E" A hardware error has • Call for service.
alone (no other lettefl occurred.
Display flashing "E" Kegpod Error, indicoting • Clean the keupad area. Wipe up spills or remove
alternating to "c" kegpod cleaning is needed, utensils from the keypad area.
Display flashing "E"
alternating to "o"
Over Temperature, indicoting
over tempereture of e
surfece element or electronics.
• Remove an empty pan from the surface element.
• Allow the cooktop to cool down approximatelu
]0 minutes.
• Check to be sure ventilation to the cooling system
below the cooktop is not blocked.
19