GE PHP960 Manual Del Propietário página 16

Cleaning the glass cooktop.
Clean gour cooktop after
each spill. Use CERAMA
BRVTE ® Ceramic Cooktop
Cleaner.
Normal Daily Use Cleaning
Use CERAMA BRYTE ® Ceramic Cooktop
Cleaner on the gloss cooktop.
To maintain and protect the surface of
gour gloss cooktop, follow these steps:
rm
Beforeusing the cooktop for the
first time, cleon it with CERAHA
BRYTE ® Ceramic Cooktop Cleaner.
This helps protect the top and makes
cleanup easier.
[_] Doilg use of CERAMA BRYTE ® Ceramic
Cooktop Cleanerwill help keep the
cooktop looking new.
%
Shakethe cleaning cream well. Applg
a few drops of CERAMA BRYTE ®
Ceramic Cooktop Cleaner directlg
to the cooktop.
[_ Use o paper towel or CERAMABRYTE ®
Cleaning Pod for Ceramic Cooktops to
cleon the entire cooktop surface.
[] Use a drg cloth or paper towel to
remove oil cleaning residue. No
need to rinse.
NOTE: It is very important that you DO
NOT heat the cooktop until it has been
cleaned thoroughly.
Use a CERAMABRYTE ® Cleaning
Pad for Ceramic Cooktops or a
Scotch-Brite ® Multi-Purpose No
Scratch blue scrub pad.
Burned-On Residue
WARNING: DAMAGEto gout glass surface
mog occur if gou use scrub pads other
than the pod included with gout cooktop.
_-] Allow the cooktop to cool.
[_] Spread a few drops of CERAMA
BRYTE ® Ceramic Cooktop Cleaner
on the entire burned residue area.
%
Using the included CERAMA BRYTE ®
Cleaning Pad for Ceramic Cooktops,
rub the residue area, applging
pressure as needed.
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE ®Ceramic Cooktop Cleaner
and a paper towel.
The CERAMABRYTE ® Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts
Center. Seeinstructions under
"To Order Parts" section on
next page.
NOTE:Do not use a dull or
nicked blade.
Heavy, Burned-On Residue
%
[]
Allow the cooktop to cool.
Use o single-edge razor blade
scraper atopproximotelg o 45°
angleagainst theglass surface
and scrapethesoil. It will b e
necessorg toopplgpressure
to the razor scraper in order
to remove the residue.
%
After scraping with the razor
scraper, spread a few drops of
CERAMABRYTE ® Ceramic Cooktop
Cleaner on the entire burned residue
area. Use the CERAMA BRYTE ®
Cleaning Pod to remove ang
remaining residue.
[] For additional protection, after oil
residue has been removed, polish
the entire surface with CERAMA
BRYTE ®Ceramic Cooktop Cleaner
and a paper towel.
16