1. Manuales
  2. Marcas
  3. Whittier Wood Furniture Manuales
  4. Muebles de Interior
  5. Riverside 157Wa
  6. Instrucciones de ensamble

Whittier Wood Furniture Riverside 157Wa Instrucciones De Ensamble

Ocultar thumbs
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Model #
157Wa
Riverside
Counterstool
Assembly Instructions
Congratulations!
This fine piece of furniture will make a gorgeous addition to
your home. For the best results, read the Assembly
Instructions and Finishing Hints before you begin your
project.
Service Policy: We will replace any part that is defective,
missing or damaged during assembly. For a replacement
part, directly contact Whittier Wood Products customer
service department by phone, fax, mail or email.
Hours: Our friendly customer service staff can be reached
Monday-Friday 7:00 a.m. to 5:00 p.m. (Pacific Time). You
may leave a message 24 hours a day, seven days a week.
800-653-3336 • Outside the U.S. or Canada: 541-687-0213 • Fax: 541-687-2060
CALL US FIRST! Do not return this item to the store
www.whittierwood.com • P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
P.O. Box 2827
Eugene, OR 97402 USA
IMPORTANT NOTES:
• For normal household use only. Not recommended for commercial use.
• Do not climb or stand on this piece of furniture.
• Before you begin your project, completely read the Assembly
Instructions and Finishing Hints.
• Store this item: 1- in its box; 2- in a dry place; 3- in temperatures that
range from 40°F to 90°F (not on a cold and possibly damp cement
floor).
• Periodically inspect your furniture for any loose glue joints, screws or
any other problem that might affect the stability of your furniture.
Tighten or repair as needed.
Notice to California Customers
California Prop 65 requires consumer goods to be labeled if any one of
850+ different chemicals or substances, including wood dust, is present
even in trace amounts. Drilling, sawing, sanding or machining wood
products generates wood dust, a substance known to the State of
California to cause cancer. Warning: This product contains a chemical
or substance known to the State of California to cause cancer, birth
defects or other reproductive harm.
California Health and Safety Code Section 25249.6
DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.
To Order: Provide the furniture model number (upper
portion of this page), the part letter, production code,
quantity needed, reason for replacement and your full
name, address and telephone number.
Parts ship from our Eugene, Oregon factory within one or
two business days from the time we receive your request.
Please allow five to ten business days for delivery.
Production Code:
VN
WARNING
10/13
Tabla de contenido
loading

Manuales relacionados para Whittier Wood Furniture Riverside 157Wa

Resumen de contenidos para Whittier Wood Furniture Riverside 157Wa

  • Página 1 Model # 157Wa Riverside IMPORTANT NOTES: Counterstool • For normal household use only. Not recommended for commercial use. • Do not climb or stand on this piece of furniture. • Before you begin your project, completely read the Assembly Assembly Instructions Instructions and Finishing Hints.

  • Página 2: Part Description

    157Wa Riverside Counterstool – Parts List Please identify the parts and check that quantities received match those on this list. If you need to replace a part, refer to the following letter and model name. PART DESCRIPTION QTY. PART DESCRIPTION QTY.
  • Página 3 NOTE: Before you begin to assemble this product, lay out all of the parts to become familiar with their locations on the stool. Note that there are two Left Legs and two Right legs. When you place a leg on its side with the two higher holes facing up, the other two holes on the Left Leg will face left.
  • Página 4 When you start the screw, place the screw head approximately 1/2" away from the nearest surface. Insert the screws first into the slightly higher pair of Long Side Stretchers. Fig. 4 Fig. 4a Upper pair 4. Fasten a Leg (CC & DD) to each corner of the Swivel (J) with a 5/16" x 3" Lag Bolt (N) and a 5/16"...
  • Página 5 Fig. 6 Turn the chair upside-down on a clean, protected surface. Place a small amount of glue on the tapered ends of the Wood Wedges (P) and pound them into the slots in the bottoms of the Back Posts (E & F) as shown in Figure 6. Be careful not to displace the Back Posts. Fig.

  • Página 6: Taburete Con Respaldo Riverside

    Modelo # 157Wa Taburete con NOTAS IMPORTANTES: Respaldo Riverside • Para uso de viviendas normales únicamente. No se recomienda para uso comercial. • No se suba ni se pare sobre esta mueble. Instrucciones de ensamblar • Antes de comenzar su proyecto, lea completamente las instrucciones de ensamblar y las indicaciones finales.
  • Página 7 157Wa Taburete con Respaldo Riverside Lista de piezas Identifique las piezas y verifique que las cantidades que recibió coincidan con las de la lista. Si necesita reemplazar una pieza remítase a la siguiente letra y nombre de la misma. Cantidad Cantidad Asiento ............1 Mecanismo de giro.........1...
  • Página 8 Fig. 4 — Upper pair = Par superior Tal vez sea necesario utilizar un mazo de caucho o un martillo con protección para insertar estas Para insertar el tornillo al ángulo correcto, piezas en su lugar. Es importante que los rebordes cuando comience a atornillar el tornillo, de los Puntales del Respaldo y de los Largueros la cabeza del tornillo debe estar a...

  • Página 9: Remarques Importantes

    No. De Modèle 157Wa Tabouret de Comptoir Riverside REMARQUES IMPORTANTES : • Pour un usage domestique uniquement. Non recommandé pour un Instructions d’assemblage usage commercial. • Ne pas monter ni se mettre debout sur cet article d’ameublement. • Avant de commencer, lire attentivement les instructions d’assemblage et les conseils de finition.

  • Página 10: Instructions D'assemblage

    157Wa Tabouret de Comptoir Riverside Nomenclature des pièces Veuillez identifier les pièces et vérifier que les quantités reçues correspondent à la quantité indiquée sur la liste. S’il faut remplacer une pièce, consulter la lettre qui figure ci-dessous et le nom de l’article. Quantité...
  • Página 11 Fig. 4 — Upper Pair = Paire Supérieure (G) de manière à ce que leurs parties plates suivent Fig. 4a — 1,27 cm (1/2 po) la courbe du dossier (B). Il pourra être nécessaire d’utiliser un maillet en caoutchouc ou un marteau Pour introduire la vis à...
  • Página 12 Whittier Finishing Hints instructions call for a slow drying glue. Carefully read the Checklist of materials label and instructions of the glue manufacturer. Your unit □ □ □ Rubber gloves Tack cloth #220 & #320 may not need glue. □ □...
  • Página 13 Whittier Finishing Hints Preparing the surface apply additional coats. Lightly sand and wipe surface with a lint-free rag or tack cloth between coats. 1. Sand each piece with #220 grit sandpaper. Sand with the grain of the wood on flat surfaces and opposite the 4.

  • Página 14: Consejos De Whittier Para Terminaciones

    Consejos de Whittier para terminaciones Consejos de pegado Lista de control de materiales Estos son algunos consejos generales. Consulte las □ □ □ Guantes de Paño de Papel de lija instrucciones de ensamblaje para obtener información detallada hule adherencia No. 220 y No. sobre cómo pegar el producto específico que utilice.
  • Página 15 Consejos de Whittier para terminaciones Consejos para las terminaciones Aplicación de la capa de acabado Utilice productos de la misma marca para garantizar la Siempre debe leer y seguir las instrucciones de la etiqueta. compatibilidad. No se recomienda mezclar terminaciones a Mezcle suavemente el preparado para la capa de acabado, base de solventes y a base de agua.

  • Página 16: Conseils De Finition De Whittier

    Conseils de finition de Whittier Conseils en matière de collage Liste de vérification des matériaux Cette section contient des conseils d'ordre général. Veuillez vous □ □ □ Gants en Chiffon résiné Papier de reporter aux instructions d'assemblage pour des renseignements □...
  • Página 17 Conseils de finition de Whittier enduits de finition à base de solvant et d'eau. Lisez et suivez Lisez et suivez les instructions figurant sur l'étiquette. toujours les instructions figurant sur le produit. Mélangez doucement l'enduit de finition; n'agitez pas. Le fait d'agiter peut entraîner la formation de bulles qui seront par la L'aulne est un bois dur et poreux dont l'aspect est souvent suite difficiles à...

Tabla de contenido