Idiomas disponibles
Idiomas disponibles
SP6593
Sears
Kenmore
7/21/@5
2:16
PH
_ge
6
Water Fifl
WARNING: To reduce the risk of
shock, always unplug humidifier
before cleaning or servicing.
WARNING: To reduce the risk of fire
or shock hazard, do not pour or spill
water into control or motor area.
If controls get wet, Iet them dry
completely and have unit checked by
authorized service personnel before
plugging in.
This humidifier is designed for use with
the two water bottles that are located
under the pivoting lid.
Open the pivoting Iid of the humidifier.
Remove the water bottles by lifting them
straight up and out of the cabinet.
Notice the water bottles are designed as
right and Ieft hand units. Position them in
the correct location so the humidifier can
function properly. The water bottles
should rest in the front of the cabinet.
Each "E-Z-FilI Side-Cap" must be facing
the rear of the unit.
Each water bottle is designed with an
"E-Z-FilI Side-Cap" that is easily
removable. Remove the "E-Z-FilI Side-
Cap" on the side of the water bottle by
twisting counterclockwise.
Place the opening of the water bottle
under a water faucet (the bottle should fit
under a four-inch clearance faucet). FilI
with recommended
mixture of cotd water
and Sears Bacteriostat #32-14900 (if
necessary) only. Solid debris could make
the valve leak.
Install the "E-Z-Fill Side-Cap" by twisting
clockwise. Hand tighten only.
Check for possible
leaks by
performing
the following:
1. Grasp bottle handle and hold the bottle
upright over a sink.
2. Press up on the valve cap plunger for
about one second to let out a little
water.
3. Release the plunger.
4. Listen for air bubbles Look for leaks
around the "E-Z-Fill Side-Cap".
5. If you hear air bubbles or see leaks,
retighten the "E-Z-Fill Side-Cap" and
repeat Steps 1-4.
/ Fan Aesembmy
Pivoting
Lid
Bottles
"E-Z-Fill Side-Cap"
Shoumd
Amways Face Rear
Turn Countercmockwise
lo Remove Cap
