Idiomas disponibles
Idiomas disponibles
SP6593
Sears
Kenmore
7/21/@5
2:17
PH
_ge
1@
Replacement
and Care of Filters
(conrd.)
1. Unplug humidifier and proceed to
clean. Before removing the fiIters, we
Lid
recommend moving the humidifier to
Fan Assembmy
an area where floor coverings are not
//
susceptible to water damage, Le.
kitchen or bath areas.
Humidifier
2. Open the pivoting lid and remove
water bottles and set aside. Grasp the
/
/"
fan assembly front center and rear
center. Lift off and set aside on a clean
flat surface. The filter housings are
now accessible.
3.
Lift filter housing out of cabinet and
place where you may work on them
comfortably. With a soft, absorbent
cloth remove any remaining water or
loose mineral deposits not trapped in
the filter from the humidifier cabinet.
Spring
tT abs
/\
/I
Filter
Housing
4. To open filter housing for easy access
to filters:
a. Deflect the two spring tabs on top of
filter housing. Lift top cover off of
the filter housing and set aside.
b. Remove the two filters and dispose
of properly. Clean internal parts of
humidifier per the "Cleaning and
Maintenance" section of your
operator's manual.
c. Install new filters in the filter housing
track with the glue beads of the
wicking pad to the inside of the filter
housing.
d. Return the top cover of the filter
housing by installing cover over the
fixed tabs on the rear of the lower
filter housing and pivoting the cover
down over the top of the filters.
Snap the cover over the two spring
tabs.
e. Replace the filter housing in the
cabinet.
Spring
Tabs
Front of
Humidifier
Fixed Tabs
Filter
zHousing
/
Rear of
Humidifier
Top
/
Cover
!
Spring
10
Tabs
