Idiomas disponibles
Idiomas disponibles
Step 3
Place pumice stones (E) into fire bowl (C)�
CAUTION:
To ensure proper function, the screen on this burner should
be free of pumice stones at all times�
Keep away from the unit and allow the unit to burn 20
minutes for the first time use� Always ensure that pumice
stones are completely dry before use� Failure to do so will
cause them to crack or pop�
Step 4
Put the 20 lb� propane gas tank (not included) into the
tank holder (F)� Turn the wing screw on the outside of
the tank holder (F) clockwise to tighten the tank into
the tank holder�
DANGER:
Propane tank must be a minimum of 60 inches away
at all times�
Step 5
Turn the cylinder valve on the tank clockwise to close the
propane tank� Attach the preassembled regulator from
the hose to the cylinder valve by turning the regulator
coupling nut clockwise� Make sure it is fastened securely
and tighten connections by hand only�
WARNING:
Please inspect the rubber O-ring in the propane tank valve
to ensure it is not worn before attaching the regulator� Worn
rubber O-ring can cause leaks, explosions and serious injury
by propane tank�
C
CYLINDER VALVE
BLACK COUPLING NUT
turn clockwise to connect
REGULATOR
RUBBER O-RING
ASSEMBLY INSTRUCTIONS
F
PRESSURE
RELIEF VALVE
BLEED-OFF
VALVE
turn clockwise
to reseal
E
9
