Roadstar HIF-1850TUMPK Manual De Instrucciones página 6

2 English
•
OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not fall
and liquids are not spilled into the enclosure through openings.
•
DAMAGE REQUIRING SERVICE
The appliance should be serviced by qualified service personnel when:
- The power supply cord or plug has been damaged;
- Objects have fallen into or liquids has been spilled into the radio;
- The appliance has been exposed to rain;
- The appliance has been dropped or the enclosure damaged;
- The appliance does not appear to operate normally.
• SERVICING - The user should not attempt to service the appliance beyond that
descrive in the user operating instructions. All the servicing should be referred to
qualified service personnel
Note: If the display does not function properly or no reaction to operation of any con-
trol may due to the electrostatic discharge. Switch off and disconnect the AC cord
then turn the power back on after a few seconds.
POWER SOURCES
AC POWER: You can power your portable stereo system by plugging the AC power
cord (27) into a wall power outlet. Check that the rated voltage of your appliance
matches your local voltage.
TO USE THE RADIO
1. Press the [POWER] button (25) to turn ON the unit;
2. Select the desired audio source by turning the [FUNCTION KNOB] (14);
3. (Please see detailed instructions for each Source in the following chapters);
4. Adjust the volume with the [VOLUME KNOB] (20) to the desired level;
5. Press and hold the [POWER] button (25) to turn OFF the unit.
Note: When no sound is produced, the unit will switch OFF automat. after 10 minutes.
RADIO OPERATION
1. Select "FM" or "AM" by turning the [FUNCTION KNOB] (14);
2. Adjust radio frequency to your desired station
(10).
Note: For a better reception FM move the wired antenna (26) around.
For AM reception the signals are picked up through a built-in ferrite antenna. Your
may have to orient the unit to obtain the best reception.
TURNTABLE OPERATION
1. Select "PHONO" (PH) by turning the [FUNCTION KNOB] (14);
2. Place a record on the turntable. Place the EP adapter over the central spindle
when playing 45 rpm records;
3. Set the Speed Selector (4) to 33, 45 or 78 rpm according to the record;
4. Move the tonearm to the beginning of the record;
5. To stop manually, lift up the tonearm from record and return it to the rest support.
by turning the [TUNING KNOB]