Idiomas disponibles
Idiomas disponibles
PROBLEM
The water flow is low
during spraying.
There's no water
spraying out.
The water flow is not
stable.
38
56-VOLT LITHIUM-ION PRESSURE WASHER — HPW3200/HPW3200-FC
CAUSE
◾
The filter is blocked partially.
◾
The metal mesh in the water
inlet port is blocked partially.
◾
The filter and quick-coupler
joint of the siphon hose is not
fully immersed into water.
◾
The siphon hose is folded.
◾
Water is dirty.
◾
The high-pressure hose is
blocked.
◾
There is no water supply.
◾
The filter is blocked
completely.
◾
The metal mesh in the water
inlet port is block completely.
◾
The nozzle is blocked.
◾
Pump, hoses, or other
components are frozen.
◾
Air flows into the washer.
◾
Pump seals are worn.
SOLUTION
◾
Clean the filter.
◾
Remove and clean the metal
mesh.
◾
Fully immerse the filter and
quick-coupler joint into water.
◾
Unfold the siphon hose or
replace it.
◾
Use only clean water.
◾
Remove the nozzle, and then
start water spraying from the
hose to clear the blockage of
the hose.
◾
Check and ensure the washer
is connected to the water
supply properly.
◾
Clean the filter.
◾
Remove and clean the metal
mesh.
◾
Use the nozzle cleaning
needle to pass through the
holes.
◾
Wait until they are thawed.
◾
Check and ensure the siphon
hose is connected properly.
◾
Contact EGO customer
service.
