Keys
(1) Oil Drain Tube
For Future Use
Slope Sheet
(2) Keys
Your new tractor has been assembled
at the factory with the exception of those parts left
unassembled
for shipping purposes.
When right or left hand is mentioned
in this
manual, it means, from your point of view,
when you are in the operating position (seat-
ed behind the steering wheel).
TO
REMOVE
TRACTOR
FROM
CARTON
UNPACK CARTON
1. Cut along dashed lines on all four panels
of carton. Remove end panels and lay
side panels flat.
2. Remove protective materialsfromtractor
hood and grille.
IMPORTANT." Check for and remove any
staples in skid that may puncture tires where
tractor is to roll off skid.
CHECK BATTERY
1. Lift hood to raised position.
NOTE: If this battery is put into service after
month and year indicated on label (L) (label
is located between terminals) charge battery
for minimum of one hour at 6-10 amps. (See
"BATTERY"
in Maintenance
section of this
manual for charging instructions).
ADJUST
SEAT
1.
Sit in seat.
2.
Lift up adjustment
lever (A) and slide seat
until
a comfortable
position
is reached
which
allows
you to press
clutch/brake
pedal
all the way down.
3.
Release
lever to lock seat in position.
NOTE:
You may now roll your tractor
off the
skid. Follow the appropriate
instruction
below
to remove
the tractor
from the skid.
WARNING:
Before
starting,
read,
un-
derstand
and follow
all instructions
in the
Operation
section
of this manual.
Be sure
tractor
is in a well-ventilated
area.
Be sure
the area in front of tractor
is clear
of other
people
and objects.
TO ROLL
TRACTOR
OFF SKiD
(See
Operation
section
for
location
and
function
of controls)
1. Raise attachment
lift to highest position.
2.
Release parking
brake by depressing
brake pedal.
3.
Place freewheel
control in disengaged
position to disengage transmission
(See
"TO TRANSPORT"
in the Operation sec-
tion of this manual).
4.
Roll tractor forward off skid.
5.
Remove banding holding the deflector
shield up against tractor.
Continue with the instructions that follow.
7