Idiomas disponibles
Idiomas disponibles
Description
The AH200 is the ultimate tool for a professional finish on your arenas or sand schools. The 2.0m working width and heavy duty fixed spring tines
on a steel frame give the AH200 exceptional performance in levelling and rejuvenating surfaces, along with a rear consolidation roller to give a
great finish. Arenas and gallops are becoming more sophisticated in their construction with synthetic materials being added to the surfaces to
provide superior, stable riding surfaces.
40 8mm tines offset over 4 rows means no missed spots. Easily adjust the aggressiveness of the tines with three tine settings and simple
adjustment. Six front mounted 'S' Tines allow the AH200 to loosen and lift the surface to give a greater mix of more fibre and synthetic materials.
The Spring Tines that follow smooths out the surface before the rear consolidation roller compacts and orientates fibres across the surface. A 12v
electric lift actuator is fitted which lets you simply raise & lower the machine into work mode or travelling mode with a remote switch on the
back of your ATV/UTV.
These machines should however only be used to perform tasks for which they were designed - use of the machine for any other function may be
both dangerous to persons, and potentially damaging to components. Use of the machine beyond the stated usage may invalidate any applicable
warranty, as well as being potential in breach of applicable safety regulations.
Note: This machine is for off-road use only and is not designed or approved for highway travel
Identification
Each machine is fitted with a serial plate (shown below) which details the
following:
1. Model
2. Date of Manufacture (DOM)
3. Serial Number
4. Mass
When enquiring regarding spares or additional equipment, ensure you have this information to hand.
Implement Decals
If your implement does not contain all of the decals shown below, please contact Chapman Machinery for replacement decals before use.
Note: All decals must be present and visible. It is imperative that these are replaced if damaged to prevent potential harm to users.
CAUTION - Read operators
manual before handling this
machine. Observe
instructions and safety rules
when operating.
ENSURE CONTROL EQUIPMENT IS SECURELY ATTACHED TO THE TOWING
ENSURE CONTROL EQUIPMENT IS SECURELY ATTACHED TO THE TOWING
WARNING – Crush Hazard
Never reach into crush area
as parts may move trapping
appendages
VEHICLE BEFORE USE
Page 3
English
