Idiomas disponibles
Idiomas disponibles
IMPORTANT! READ CAREFULLY AND KEEP FOR
FUTURE REFERENCE.
HIGHCHAIR
WARNING
Never leave the child unattended.
WARNING
Always use the restraint system.
WARNING
Falling hazard: Prevent your child from climbing on the product.
WARNING
Do not use the product unless all components are correctly tted and adjusted.
WARNING
Be aware of the risk of open res and other sources of strong heat in the vicinity of the product.
WARNING
Be aware of the risk of tilting when your child can push its feet against a table or any other structure.
Do not use the highchair until the child can sit up unaided.
Do not use the highchair if any part is broken, torn or missing.
To avoid injury ensure that your child is kept away when unfolding and folding this product.
This product is intended for children able to sit up unaided and up to 3 years or a maximum weight of 15 kg.
Periodically check the buttons and harness system for safety.
Always use the chair on a at even surface.
Keep the chair away from children when not in use.
The chair must not be used as a toy.
The high chair is suitable for children able to sit up unaided and up to 36 months.
Do not use the product as a high chair until the child can sit up alone.
The tray and the accessories are not designed to support the child' s weight.
The tray is not designed to keep the child in the seat and does not substitute the safety harness.
BABY BOOSTER
WARNING
Never leave the child unattended.
WARNING
Always use the restraint system and ensure it is correctly tted.
WARNING
Always use the chair attachment system and ensure it is correctly tted before use.
WARNING
Always check the security and the stability of the product on the adult chair before use.
WARNING
Do not use this product on stools or benches.
Producido para Kika Group Ltd., Vasil Levski 121, Plovdiv, Bulgaria. Hecho en china.
• This product is intended for children able to sit up unaided ( minimum 6 months ) and up to 36 months
or a maximum weight of 15 kg.
Minimum sizes of the adult chair:
• back height: 560 mm
• seat width: 450 mm
• seat depth: 420 mm
• The minimum dimensions (width and depth) of the seat of the chairs for which the chair mounted seat is intended, shall be at least 20 mm greater than the base dimensions
(width and depth) of the chair mounted seat measured.
• The minimum height of the backrest of the chairs for which the product is intended, shall be at least 20 mm greater than the height of anchorage points of the chair attachment
system measured.
• Ensure that the adult chair with the chair mounted seat is placed in a position where the child is not able to use its feet to push against the table or any other structure as this can
cause the tip over of the adult chair supporting the chair mounted seat.
• Do not use the chair mounted seat if any part is broken, torn or missing.
• Do not use accessories or replacement parts other than those approved by the manufacturer.
This product applies with EN 14988:2017+A1:2020; EN 16120:2012+ 2:2016
I. PARTS LIST
1. Upper leg; 2. Under leg; 3. Anti-slip mats; 4. Suit foot-rest; 5. Foot-rest; 6. Dining tray
II. HIGH CHAIR INSTALLATION
1.
Bring the seat and put the plate upside, check the chair whether there are any parts missing. ( see Fig. 2.1)
2. Highchair needs 8 legs - 4 upper legs and 4 legs under. The one that has two di erent diameter heads is under the leg. ( see Fig. 2.2 )
3. Put the upper legs into the plastic chair, the snap spring pop-up means it is installed well. ( see Fig. 2.3)
4. After installing the upper legs install the suits for foot-rest in the front legs. The suits have left and right ones. ( see Fig. 2.4 )
5. Install the under legs, the snap spring needs pop-up. ( see Fig. 2.5 )
6. Place the foot-rest on the suits. Using the screws to fasten it. ( see Fig. 2.6 )
7. Open the chair backrest, push it to back and you will hear a "click" sound which means it is well installed. To fold the chair you need to put the two white buttons together when
not in use. ( see Fig. 2.7 )
8. Install the dining plate. The plate needs two button points connected with chair each side at least in order to fasten it. ( see Fig. 2.8 )
III. SMALL CHAIR INSTALLATION
1.
Uninstall the under legs and foot-rest.
2.
Install anti-slip mats on the upper legs.
IV. BOOSTER SEAT INSTALLATION
1.
Bring the seat and place on a at chair. ( see Fig. 4.1 )
2.
Fasten the belt on the bottom, and keep it tight. ( see Fig. 4.2 )
3.
Then tie the back belt and also keep it tight. ( see Fig.4.3 )
4.
Tie the safe belt after child sits well and adjust the lenght according to the child. If needed install the tray at the same height with the height of the chair. ( see Fig. 4.4 )
V.
SETTING TRAY See pictures 5.1-5.4: POSITION1: Install 1 to B and 2 to C, please installl correctly till you hear "click" sound. POSITION2: Install 1 to A, 2 to B and 2 to C. Please,
install corrctly till you hear "click" sound.
POSITION 3: Install 2 to A and 3 to B. Please, install correctly till you hear "click" sound. ENSURE THAT ALL THE LOCKING DIVICES ARE ENGAGED WELL BEGORE USE.
MAINTENANCE AND CARE
• The plastic and metal parts must be cleaned with a damp soft cloth and dried with dry soft cloth.
• Do not let the product exposed to the harmful e ect of external factors - direct sunlight, rain, snow or wind. This may lead to damage of the metal and plastic parts and fading of
the fabrics of the crib.
• When you are not using the product, store it at a dry and well ventilated place, not in dusty, humid premises with very high or very low room temperatures.
From time to time check all plastic parts that are hanged on the frame. Tighten all screw and bolts if necessary.
• Cleaning the cushion: Unfasten the safety belt. Wash it with warm water and dry it to avoid exposure under high temperature.
• Do not use bleach and strong acid/base liquid for cleaning the chair frame. Avoid contact with water in hardware parts, as corrosion will a ect the service.
ENGLISH
