Idiomas disponibles
Idiomas disponibles
Winterizing and Long-Term Storage
FOLLOW ALL OF THE ABOVE SHUT-DOWN
PROCEDURES, ADDING THE FOLLOWING STEPS.
After disconnecting the water supply, and before disconnecting the
highpressure hose, turn the pressure cleaner on for 2-3 seconds, until any
remaining water in the pump exits.
CONTINUED USE OF THE PRESSURE CLEANER WITHOUT WATER SUPPLY
ATTACHED WILL CAUSE SEVERE DAMAGE TO THE UNIT!
Always store the pressure cleaner, parts, and accessories in an area with a
temperature above 0°C (32°F).
WARNING:
failure to comply with these storage instructions will result in
damage to the pump assembly.
Maintenance
This pressure cleaner is supplied with a closed lubrication system, so no
addition of oil is needed.
Check all hoses and accessories for damage prior to use.
Check the inlet filter periodically for deposits. Clean this filter regularly for
maximum performance.
TURN UNIT OFF IMMEDIATELY.
17
